HS Chapter 72: Iron and steel
All 167 six-digit HS codes in this chapter, under 29 headings, with the official descriptions.
| HS code | Official description |
|---|---|
| 72.01 | Pig iron and spiegeleisen in pigs, blocks or other primary forms. |
| 7201.10 | Non-alloy pig iron containing by weight 0.5% or less of phosphorus |
| 7201.20 | Non-alloy pig iron containing by weight more than 0.5% of phosphorus |
| 7201.50 | Alloy pig iron; spiegeleisen |
| 72.02 | Ferro-alloys. |
| 7202.11 | Containing by weight more than 2% of carbonFerro-manganese |
| 7202.19 | OtherFerro-manganese |
| 7202.21 | Containing by weight more than 55% of siliconFerro-silicon |
| 7202.29 | OtherFerro-silicon |
| 7202.30 | Ferro-silico-manganese |
| 7202.41 | Containing by weight more than 4% of carbon Note: The benefit of the Most-Favoured-Nation Tariff is extended to goods of this tariff item that originate in a country to which the General Tariff applies.Ferro-chromium |
| 7202.49 | Other Note: The benefit of the Most-Favoured-Nation Tariff is extended to goods of this tariff item that originate in a country to which the General Tariff applies.Ferro-chromium |
| 7202.50 | Ferro-silico-chromium |
| 7202.60 | Ferro-nickel |
| 7202.70 | Ferro-molybdenum |
| 7202.80 | Ferro-tungsten and ferro-silico-tungsten |
| 7202.91 | Ferro-titanium and ferro-silico-titaniumOther |
| 7202.92 | Ferro-vanadiumOther |
| 7202.93 | Ferro-niobiumOther |
| 7202.99 | OtherOther |
| 72.03 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms. |
| 7203.10 | Ferrous products obtained by direct reduction of iron ore |
| 7203.90 | Other |
| 72.04 | Ferrous waste and scrap; remelting scrap ingots of iron or steel. |
| 7204.10 | Waste and scrap of cast iron |
| 7204.21 | Of stainless steelWaste and scrap of alloy steel |
| 7204.29 | OtherWaste and scrap of alloy steel |
| 7204.30 | Waste and scrap of tinned iron or steel |
| 7204.41 | Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundlesOther waste and scrap |
| 7204.49 | OtherOther waste and scrap |
| 7204.50 | Remelting scrap ingots |
| 72.05 | Granules and powders, of pig iron, spiegeleisen, iron or steel. |
| 7205.10 | Granules |
| 7205.21 | Of alloy steelPowders |
| 7205.29 | OtherPowders |
| 72.06 | Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03). |
| 7206.10 | Ingots |
| 7206.90 | Other |
| 72.07 | Semi-finished products of iron or non-alloy steel. |
| 7207.11 | Of rectangular (including square) cross-section, the width measuring less than twice the thicknessContaining by weight less than 0.25% of carbon |
| 7207.12 | Other, of rectangular (other than square) cross-sectionContaining by weight less than 0.25% of carbon |
| 7207.19 | OtherContaining by weight less than 0.25% of carbon |
| 7207.20 | Containing by weight 0.25% or more of carbon |
| 72.08 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated. |
| 7208.10 | In coils, not further worked than hot-rolled, with patterns in relief |
| 7208.25 | Of a thickness of 4.75 mm or moreOther, in coils, not further worked than hot-rolled, pickled |
| 7208.26 | Of a thickness of 3 mm or more but less than 4.75 mmOther, in coils, not further worked than hot-rolled, pickled |
| 7208.27 | Of a thickness of less than 3 mmOther, in coils, not further worked than hot-rolled, pickled |
| 7208.36 | Of a thickness exceeding 10 mmOther, in coils, not further worked than hot-rolled |
| 7208.37 | Of a thickness of 4.75 mm or more but not exceeding 10 mmOther, in coils, not further worked than hot-rolled |
| 7208.38 | Of a thickness of 3 mm or more but less than 4.75 mmOther, in coils, not further worked than hot-rolled |
| 7208.39 | Of a thickness of less than 3 mmOther, in coils, not further worked than hot-rolled |
| 7208.40 | Not in coils, not further worked than hot-rolled, with patterns in relief |
| 7208.51 | Of a thickness exceeding 10 mmOther, not in coils, not further worked than hot-rolled |
| 7208.52 | Of a thickness of 4.75 mm or more but not exceeding 10 mmOther, not in coils, not further worked than hot-rolled |
| 7208.53 | Other, of a thickness of 3 mm or more but less than 4.75 mmOther, not in coils, not further worked than hot-rolled |
| 7208.54 | Other, of a thickness of less than 3 mmOther, not in coils, not further worked than hot-rolled |
| 7208.90 | Other |
| 72.09 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated. |
| 7209.15 | Of a thickness of 3 mm or moreIn coils, not further worked than cold-rolled (cold-reduced) |
| 7209.16 | Of a thickness exceeding 1 mm but less than 3 mmIn coils, not further worked than cold-rolled (cold-reduced) |
| 7209.17 | Of a thickness of 0.5 mm or more but not exceeding 1 mmIn coils, not further worked than cold-rolled (cold-reduced) |
| 7209.18 | Of a thickness of less than 0.5 mmIn coils, not further worked than cold-rolled (cold-reduced) |
| 7209.25 | Of a thickness of 3 mm or moreNot in coils, not further worked than cold-rolled (cold-reduced) |
| 7209.26 | Of a thickness exceeding 1 mm but less than 3 mmNot in coils, not further worked than cold-rolled (cold-reduced) |
| 7209.27 | Of a thickness of 0.5 mm or more but not exceeding 1 mmNot in coils, not further worked than cold-rolled (cold-reduced) |
| 7209.28 | Of a thickness of less than 0.5 mmNot in coils, not further worked than cold-rolled (cold-reduced) |
| 7209.90 | Other |
| 72.10 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated. |
| 7210.11 | Of a thickness of 0.5 mm or morePlated or coated with tin |
| 7210.12 | Of a thickness of less than 0.5 mmPlated or coated with tin |
| 7210.20 | Plated or coated with lead, including terne-plate |
| 7210.30 | Electrolytically plated or coated with zinc |
| 7210.41 | CorrugatedOtherwise plated or coated with zinc |
| 7210.49 | OtherOtherwise plated or coated with zinc |
| 7210.50 | Plated or coated with chromium oxides or with chromium and chromium oxides |
| 7210.61 | Plated or coated with aluminum-zinc alloysPlated or coated with aluminum |
| 7210.69 | OtherPlated or coated with aluminum |
| 7210.70 | Painted, varnished or coated with plastics |
| 7210.90 | Other |
| 72.11 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated. |
| 7211.13 | Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in reliefNot further worked than hot-rolled |
| 7211.14 | Other, of a thickness of 4.75 mm or moreNot further worked than hot-rolled |
| 7211.19 | OtherNot further worked than hot-rolled |
| 7211.23 | Containing by weight less than 0.25% of carbonNot further worked than cold-rolled (cold-reduced) |
| 7211.29 | OtherNot further worked than cold-rolled (cold-reduced) |
| 7211.90 | Other |
| 72.12 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated. |
| 7212.10 | Plated or coated with tin |
| 7212.20 | Electrolytically plated or coated with zinc |
| 7212.30 | Otherwise plated or coated with zinc |
| 7212.40 | Painted, varnished or coated with plastics |
| 7212.50 | Otherwise plated or coated |
| 7212.60 | Clad |
| 72.13 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel. |
| 7213.10 | Containing indentations, ribs, grooves or other deformations produced during the rolling process |
| 7213.20 | Other, of free-cutting steel |
| 7213.91 | Of circular cross-section measuring less than 14 mm in diameterOther |
| 7213.99 | OtherOther |
| 72.14 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling. |
| 7214.10 | Forged |
| 7214.20 | Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling |
| 7214.30 | Other, of free-cutting steel |
| 7214.91 | Of rectangular (other than square) cross-sectionOther |
| 7214.99 | OtherOther |
| 72.15 | Other bars and rods of iron or non-alloy steel. |
| 7215.10 | Of free-cutting steel, not further worked than cold-formed or cold-finished |
| 7215.50 | Other, not further worked than cold-formed or cold-finished |
| 7215.90 | Other |
| 72.16 | Angles, shapes and sections of iron or non-alloy steel. |
| 7216.10 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm |
| 7216.21 | L sectionsL or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm |
| 7216.22 | T sectionsL or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm |
| 7216.31 | U sectionsU, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more |
| 7216.32 | I sectionsU, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more |
| 7216.33 | H sectionsU, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more |
| 7216.40 | L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more |
| 7216.50 | Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded |
| 7216.61 | Obtained from flat-rolled productsAngles, shapes and sections, not further worked than cold-formed or cold-finished |
| 7216.69 | OtherAngles, shapes and sections, not further worked than cold-formed or cold-finished |
| 7216.91 | Cold-formed or cold-finished from flat-rolled productsOther |
| 7216.99 | OtherOther |
| 72.17 | Wire of iron or non-alloy steel. |
| 7217.10 | Not plated or coated, whether or not polished |
| 7217.20 | Plated or coated with zinc |
| 7217.30 | Plated or coated with other base metals |
| 7217.90 | Other |
| 72.18 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel. |
| 7218.10 | Ingots and other primary forms |
| 7218.91 | Of rectangular (other than square) cross-sectionOther |
| 7218.99 | OtherOther |
| 72.19 | Flat-rolled products of stainless steel, of a width of 600 mm or more. |
| 7219.11 | Of a thickness exceeding 10 mmNot further worked than hot-rolled, in coils |
| 7219.12 | Of a thickness of 4.75 mm or more but not exceeding 10 mmNot further worked than hot-rolled, in coils |
| 7219.13 | Of a thickness of 3 mm or more but less than 4.75 mmNot further worked than hot-rolled, in coils |
| 7219.14 | Of a thickness of less than 3 mmNot further worked than hot-rolled, in coils |
| 7219.21 | Of a thickness exceeding 10 mmNot further worked than hot-rolled, not in coils |
| 7219.22 | Of a thickness of 4.75 mm or more but not exceeding 10 mmNot further worked than hot-rolled, not in coils |
| 7219.23 | Of a thickness of 3 mm or more but less than 4.75 mmNot further worked than hot-rolled, not in coils |
| 7219.24 | Of a thickness of less than 3 mmNot further worked than hot-rolled, not in coils |
| 7219.31 | Of a thickness of 4.75 mm or moreNot further worked than cold-rolled (cold-reduced) |
| 7219.32 | Of a thickness of 3 mm or more but less than 4.75 mmNot further worked than cold-rolled (cold-reduced) |
| 7219.33 | Of a thickness exceeding 1 mm but less than 3 mmNot further worked than cold-rolled (cold-reduced) |
| 7219.34 | Of a thickness of 0.5 mm or more but not exceeding 1 mmNot further worked than cold-rolled (cold-reduced) |
| 7219.35 | Of a thickness of less than 0.5 mmNot further worked than cold-rolled (cold-reduced) |
| 7219.90 | Other |
| 72.20 | Flat-rolled products of stainless steel, of a width of less than 600 mm. |
| 7220.11 | Of a thickness of 4.75 mm or moreNot further worked than hot-rolled |
| 7220.12 | Of a thickness of less than 4.75 mmNot further worked than hot-rolled |
| 7220.20 | Not further worked than cold-rolled (cold-reduced) |
| 7220.90 | Other |
| 72.21 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. |
| 7221.00 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. |
| 72.22 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel. |
| 7222.11 | Of circular cross-sectionBars and rods, not further worked than hot-rolled, hot-drawn or extruded |
| 7222.19 | OtherBars and rods, not further worked than hot-rolled, hot-drawn or extruded |
| 7222.20 | Bars and rods, not further worked than cold-formed or cold-finished |
| 7222.30 | Other bars and rods |
| 7222.40 | Angles, shapes and sections |
| 72.23 | Wire of stainless steel. |
| 7223.00 | Wire of stainless steel. |
| 72.24 | Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel. |
| 7224.10 | Ingots and other primary forms |
| 7224.90 | Other |
| 72.25 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. |
| 7225.11 | Grain-orientedOf silicon-electrical steel |
| 7225.19 | OtherOf silicon-electrical steel |
| 7225.30 | Other, not further worked than hot-rolled, in coils |
| 7225.40 | Other, not further worked than hot-rolled, not in coils |
| 7225.50 | Other, not further worked than cold-rolled (cold-reduced) |
| 7225.91 | Electrolytically plated or coated with zincOther |
| 7225.92 | Otherwise plated or coated with zincOther |
| 7225.99 | OtherOther |
| 72.26 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. |
| 7226.11 | Grain-orientedOf silicon-electrical steel |
| 7226.19 | OtherOf silicon-electrical steel |
| 7226.20 | Of high speed steel |
| 7226.91 | Not further worked than hot-rolledOther |
| 7226.92 | Not further worked than cold-rolled (cold-reduced)Other |
| 7226.99 | OtherOther |
| 72.27 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. |
| 7227.10 | Of high speed steel |
| 7227.20 | Of silico-manganese steel |
| 7227.90 | Other |
| 72.28 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. |
| 7228.10 | Bars and rods, of high speed steel |
| 7228.20 | Bars and rods, of silico-manganese steel |
| 7228.30 | Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded |
| 7228.40 | Other bars and rods, not further worked than forged |
| 7228.50 | Other bars and rods, not further worked than cold-formed or cold-finished |
| 7228.60 | Other bars and rods |
| 7228.70 | Angles, shapes and sections |
| 7228.80 | Hollow drill bars and rods |
| 72.29 | Wire of other alloy steel. |
| 7229.20 | Of silico-manganese steel |
| 7229.90 | Other |
Official descriptions: CBSA Customs Tariff, 2026 (version 2). These are six-digit HS subheadings, shared by Canada, the United States and Mexico. Import entries need the full ten-digit code for the importing country: check the CBSA Customs Tariff for Canada or the U.S. Harmonized Tariff Schedule, and confirm the classification with your customs broker.